Metal Roof Repair in Rochester, NY

Metal Metal Roof Repair

Same-Day Service Available

Free Estimates & Free Roof Inspections

On This Page

Metal Metal Roof Repair in Rochester, NY

Metal roofs are built to outlast most other systems, but they are not maintenance-free. Fasteners back out, sealant fails at ridge caps and penetrations, and panel edges can lift under wind load over time. Catching these issues early is almost always less expensive than what follows if they are left alone through a Rochester winter. Stellar Roofing has been repairing metal roofs across Rochester since 2013, with no trip charge and most repairs completed on the first visit. Call (585) 213-2661 to schedule.

Contact Us Today

Scheduling a free estimate is easy.

We will never share, trade, or otherwise sell your personal information such as Phone numbers and SMS consent to third parties under any circumstances and you agree to the Privacy Policy.

What to Expect From a Metal Metal Roof Repair Visit

  • Full roof walk to identify every fastener failure, sealant breach, and lifted panel edge
  • Written upfront quote before any work is authorized
  • Fastener replacement or re-torquing at all affected points
  • Sealant removal and reapplication at ridge caps, penetrations, and seam laps
  • Panel reshaping or section replacement where impact or wind damage is involved
  • Water test and walk-through before crew departure

Where Metal Roofs Fail in Rochester’s Climate

Rochester’s freeze-thaw cycling is particularly hard on the vulnerable points of a metal roofing system. Exposed fasteners expand and contract with temperature until the rubber gaskets compress and crack, panel sealant at the ridge cures brittle and lifts, and flashing at chimneys and dormers can separate incrementally over several winters without being visible from the ground. Addressing these points proactively is a core part of protecting a home’s weatherization envelope over the long term.

Metal Metal Roof Repair Problems We Resolve

Most metal roof repair calls in Rochester come down to three points of failure. Here is what we typically find, and how we address each one.

Exposed-fastener metal systems use rubber-gasketed screws that compress over years of freeze-thaw cycling until the seal fails. Water then enters around the fastener shaft and works into the decking below. We replace failed fasteners with appropriately sized hardware and reseal the surrounding panel surface. Widespread fastener failure across the roof typically signals that full replacement is more cost-effective than spot repair.

Ridge cap sealant and flashing sealant at chimneys, vents, and skylights tend to be the first points to fail on any metal roof. We strip the degraded sealant completely, clean the surface, and apply fresh material rated for Rochester’s temperature range. Recurring sealant failures at the same locations despite previous repairs often indicate a flashing design issue worth addressing as part of the repair scope.

High wind events and freeze-thaw cycling can lift panel edges at the eave and separate standing seam locks on older installations. We re-seat and secure lifted panels and assess whether the substrate underneath has absorbed any moisture in the interim. Active leaks from panel separation are treated as emergency repairs and addressed through our emergency metal roof repair service.

In business since

With over homes served

Our Service Areas

Proudly serving homeowners across our four primary New York service regions.

Rochester Area

  • Rochester
  • Greece
  • Irondequoit
  • Brighton
  • Henrietta
  • Webster
  • Fairport
  • Pittsford
  • Victor
  • Canandaigua
  • Geneva
  • Brockport
  • Spencerport
  • Penn Yan
  • Geneseo
  • Penfield
  • Avon
  • Bloomfield
  • Farmington
  • Hilton
  • East Rochester
  • Newark
  • Macedon
  • Palmyra
  • Sodus
  • Wolcott
  • Hamlin
  • Holley
  • Clifton Springs
  • Phelps
  • Shortsville
  • Lima
  • Livonia
  • Wayland
  • York
Rochester Coverage

Buffalo Area

  • Buffalo
  • Niagara Falls
  • Lockport
  • Tonawanda
  • North Tonawanda
  • Hamburg
  • Lancaster
  • East Aurora
  • Orchard Park
  • Batavia
  • Medina
  • Newfane
  • Springville
  • Angola
  • Grand Island
  • Amherst
  • Gowanda
  • Attica
  • Arcade
  • Lewiston
  • Middleport
  • Youngstown
  • Wilson
  • Albion
  • Williamsville
  • West Seneca
  • Clarence
  • East Amherst
  • Depew
  • Gasport
  • Alden
  • Ransomville
  • Barker / Somerset
  • Akron
Buffalo Coverage

Southern Tier Area

  • Cortland
  • Corning
  • Hornell
  • Bath
  • Dansville
  • Arkport
  • Alfred
  • Almond
  • Elmira
  • Horseheads
  • Watkins Glen
  • Ithaca
  • Wellsville
  • Binghamton
  • Endicott
  • Johnson City
  • Vestal
  • Norwich
  • Oneonta
  • Addison
  • Canisteo
  • Hammondsport
  • Wayland
  • Cuba
  • Bolivar
  • Fillmore
  • Dundee
  • Groton
Southern Tier Coverage

Syracuse Area

  • Syracuse
  • Oswego
  • Utica
  • Rome
  • Auburn
  • Cortland
  • Watertown
  • Fulton
  • Oneida
  • Herkimer
  • Pulaski
  • Baldwinsville
  • Skaneateles
  • Groton
  • New Hartford
  • Canastota
  • Cazenovia
  • Seneca Falls
  • Manlius
  • Cicero
  • Fayetteville
  • Camillus
  • Weedsport
  • Phoenix
  • Mexico
  • Waterloo
  • Central Square
  • Chittenango
  • Ilion
  • Clinton
  • Hamilton
Syracuse Coverage

Financing

Options

Investing in home repair or improvement projects can be financially challenging. To ease this burden, we provide flexible financing options designed to make high-quality roofing solutions more accessible and affordable.

Contact us to learn more about our financing options

Stellar Roofing: Rochester’s Metal Metal Roof Repair Crew

Stellar Roofing is fully licensed and insured, BBB A+ Accredited, and HIP Top 50 recognized. We are a locally owned, family-operated business serving Rochester homeowners since 2013, with no trip charge and upfront pricing on every repair call. Call (585) 213-2661 for immediate assistance.

  • How do I know if my metal roof needs repair? Water staining at interior ceilings directly below a ridge or penetration, visible rust developing at fastener points rather than just surface oxidation, and panel edges that have lifted at the eave or separated at a standing seam are the most reliable early indicators. Any of these caught early is a contained repair. Left through a Rochester winter, each one tends to expand into a larger scope.
  • Can you repair a metal roof in winter? Yes. Most metal roof repairs are weather-permitting work and can be completed year-round in Rochester. Sealant application requires temperatures above a certain threshold, and we use cold-rated materials when working in winter conditions and tell you when temperature is a factor in the repair approach.
  • Is there a trip charge or diagnostic fee? No trip charge and no diagnostic fee on any repair call. We tell you what the work will cost before anything is authorized, and the inspection itself costs you nothing regardless of what we find.
  • When does repair stop making sense compared to replacement? When corrosion has penetrated through the panel substrate rather than sitting on the surface, when the fastener system has failed at enough points that re-fastening becomes a roof-wide project, or when the system has exceeded its expected service life and the next failure is simply a matter of timing. We give you an honest assessment at the estimate rather than recommending whichever scope is larger.
  • Do you match existing panel finishes on repairs? We source matching material where it is available from the original manufacturer or compatible suppliers. On older installations where the original finish has weathered significantly, some visible variation between the repaired section and the surrounding panels is likely, and we discuss that with you before the repair is authorized so expectations are accurate.

In addition to metal roof repair, our Rochester metal roofing crews also handle emergency metal roof repair, metal roof replacement, metal roof ventilation, and new metal roof installation. Call (585) 213-2661 to book or request your free estimate.

Water staining at ceiling seams directly below a ridge or penetration, fastener heads that are visibly raised or rusting through the panel finish, sealant that has pulled away from the ridge cap or is visibly cracking at lap joints, or panel edges that have lifted at the eave are all repair-level conditions when the panel substrate itself is still sound.

If your metal roof is showing signs of wear, a free on-site inspection is the best way to know what you are dealing with before a small issue becomes a larger one. Call (585) 213-2661 or book yours online today. We serve Rochester, Fairport, Henrietta, and the surrounding area with no trip charge and upfront pricing on every visit.

Related Services

  • Metal Roof Ventilation

  • Emergency Gutter Repair

  • Roofing Cost Comparison

  • Vinyl Siding Installation